Menu
Hex nuts are one of the most common nuts available and are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads.
|
Size Range: |
M6 – M64 |
|
STD: |
DIN 934 IS 1364 (PART- III) ISO 4032 |
|
Available Grades: |
CL 8, CL 10, SS 304, SS 316 |
|
Finishing |
PHOSPHATED BLACK, ZINC PLATED, HOT DIP GALVANIZED |
Hex jam nuts have two common applications. A jam nut can be threaded onto a bolt and run tight against the standard nut which will lock the nut in place and prevent it from backing off. Jam nuts are sometimes used for leveling purposes as well.
Size Range: | M3 – M48 |
STD: | DIN 439B, ISO 4035 |
Available Grades: | CL 04, CL 8, SS 304, SS 316 |
Finishing | PHOSPHATED BLACK, ZINC PLATED, HOT DIP GALVANIZED |
The Nyloc nut is an economic locking nut and ideal in applications where vibration or motion could loosen or undo the nut. The nut can also be used to assist sealing the bolt thread against seepage of oil, water, petrol, paraffin and other liquids
Size Range: | M4 – M30 |
STD: | DIN 985 & DIN 982 |
Available Grades: | CL 8, CL 10, SS 304, SS 316 |
Finishing | PHOSPHATED BLACK, ZINC PLATED |
Serrated flange nuts are hex nuts with non-spinning washers attached at the bottom. Underneath the washers are serrations which allow the nuts to securely fasten when vibrations are present and prevent them from being used with washers or on surfaces that can be scratched.
Size Range: | M3 – M24 |
STD: | DIN 7991, ISO 10642, ASME |
Available Grades: | 8.8, 10.9, SS 304, SS 316 |
Finishing | ZINC PLATED |
it is used to weld the nut onto a host material. They come with small three leg projections which are used to weld the nut into the material. The projections also help if the host surface is uneven, but the nut has to be fixed flat on the surface.
Size Range: | M3 – M16 |
STD: | DIN 929 |
Available Grades: | Steel (C Max 0.25%), SS 304, SS 316 |
Finishing | PHOSPHATED BLACK, ZINC PLATED |
Application. Commonly used in furniture as a blind nut, they are also used in rail channels in order to prevent turning of rail when pressure is applied. They are also used to make perfect foundation in metal channels for hidden fasteners.
Size Range: | M4 – M64 |
STD: | DIN 557 |
Available Grades: | CL 04, CL 05, SS 304 |
Finishing | ZINC PLATED |
It is chiefly designed to provide a dome or cap end to cover a thread in order to protect external threads. Dome or cap nuts are typically applied to the threaded end of a bolt, setscrew or all-thread bar.
|
Size Range: |
M4 – M24 |
|
STD: |
DIN 1587 |
|
Available Grades: |
CL 6, SS 304, SS 316 |
|
Finishing |
ZINC PLATED |
We are a leading manufacturer of high-quality fasteners and custom solutions, dedicated to delivering products that meet the highest standards of quality and reliability.